Symbols Used; User Information - Bosch KMA 802 Originalbetriebsanleitung

en 24 | KMA 802/822 | Symbols used
1.

Symbols used

1.1 In the documentation
1.1.1 Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequen-
ces of the hazard as well as preventive action. Warning
notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impen-
ding danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2 Symbols in this documentation
Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
1.2 On the product
!
Observe all warning notices on products and ensure
they remain legible.
|
1 689 979 674 2013-12-23
Severity of danger if inst-
ructions not observed
Death or severe injury
Death or severe injury
Minor injury
2.

User information

2.1 Important notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Diesel Test Equipment". These instructions must be care-
fully studied prior to start-up, connection and operation
of the KMA 802/822 and must always be heeded.
2.2 Safety instructions
All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety inst-
ructions for Bosch Diesel Test Equipment".
These instructions must be carefully studied prior to
start-up, connection and operation of the KMA 802/822
and must always be heeded.
2.3 Electromagnetic compatibility (EMC)
The KMA 802/822 satisfies the requirements of the
EMC directive 2004/108/EG.
i
The KMA 802/822 is a class/category C2 product as
defined by EN 61 800. The KMA 802/822 may cause
high-frequency household interference (radio inter-
ference) so that interference suppression may be
necessary. In such cases the user may be required to
take the appropriate action.
Robert Bosch GmbH