Settings; Acoustic Signals; Child Lock - Electrolux WASL3E202 Benutzerinformation

• Press this button two times to set
'Extra Quick' for items with almost no
soil.
Some programmes accept only
one of the two options.
8.4 Spülen + - Rinçage +
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water is
soft.
The related indicator comes on.
8.5 Optionen/Options
Press this button to add the stain and/or a
prewash phase to a programme.
Press the button again and again to
activate one or two options. The related
symbol and the indicator bar comes on in
the display.
• Stain: Use this option for laundry with
hard stains to remove.
When you set this option, put the stain
remover into compartment
function increases the programme
duration.
This option is not available
with a temperature lower
than 40° C.

9. SETTINGS

9.1 Acoustic signals

The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Optionen - Options and
Spülen + - Rinçage + at the same time for
6 seconds.
If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.
• Prewash: Use this option to add a
prewash phase before the washing
phase.
We recommend that you use this
option when you have laundry with a
high level of soil.
8.6 Schleudern - Essorage
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
• Deactivate the spin phase.
• Activate the Rinse Hold function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
8.7 Temp.
Press this button to change the default
. This
temperature. When the display shows
and
water.

9.2 Child Lock

With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Temp. and Schleudern -
Essorage at the same time until the
indicator
You can activate this option:
• After you press Start/Pause - Départ/
Pause : the options and the
programme knob are locked.
• Before you press Start/Pause - Départ/
Pause : the appliance cannot start.
The set of this option
increases the programme
duration.
The display shows only the
spin speeds available with
the set programme.
, the appliance does not heat the
comes on/goes off.
ENGLISH 15