Microphones, Guitar Cable - AKG WMS 40 FLEXX Bedienungsanleitung

24 Audio input: 3-pin mini XLR connector with both mic and line level pins
that automatically match the connector pinout of the recommended
AKG microphones or MKG L guitar cable.
While the MKG L guitar cable is included in the Instrumental Set (see
section 2.2 Unpacking), it is also available as an optional accessory.
25 Frequency selector: This slide switch tunes the transmitter to one of
three different carrier frequencies within the transmitter's carrier fre-
quency band.
26 Antenna: Permanently connected, flexible antenna.
27 Belt clip for fixing the transmitter to your belt.
28 Battery compartment lid with integrated screwdriver (28a).
28b Viewing window: The viewing window lets you check if there is a dry
or rechargeable battery inside the battery compartment. You can also
place a white lettering strip (supplied) or a color code strip (optional)
behind the viewing window.
29 GAIN: This rotary control inside the battery compartment allows you
to match the bodypack transmitter input gain to the microphone or in-
strument you connected to the transmitter.
30 Carrier frequency label: The label on the transmitter rear panel indi-
cates the name of the carrier frequency band and the three carrier fre-
quencies of your transmitter. Refer to the Manual Supplement sheet
for a color code table.
The PT 40 FLEXX has been designed specifically for use with the follow-
ing AKG microphones:
The MKG L guitar cable from AKG lets you connect an electric guitar, elec-
tric bass, or remote keyboard to the bodypack transmitter. The MKG L
guitar cable is included in the Instrumental Set and also available sepa-
rately as an accessory.
WMS 40 FLEXX
Downloaded from www.Manualslib.com
CK 55 L
C 417 L
C 420 L
C 444 L
manuals search engine
2 Description
2.6.2 Microphones,
Guitar Cable
27