Preparing the motor:
Terminal box seal and motor terminal board must be removed.
If necessary, extend the motor cable.
Mount the housing base to the motor:
The mounting and fixing must ensure a permanently tight mechanical connection. (DIN 6798).
If distance required: Use (2a), (3) and screw 35 mm (DIN 7985) (without : only screw 20 mm (DIN
7985))
Perfect sealing is required to ensure enclosure IP65.
L
Downloaded from
www.Manualslib.com
efesotomasyon.com - Lenze
0
cáÖK U
1a
1a
manuals search engine
3.4 Nm
30 lb-in
68-73mm
2
1
1a
2a
2a
1 × M20 (E82MV152/
E82MV222)
2 × M25
4
× M16
EDK82MV222 DE/EN/FR 9.0
Motor mounting
Preparations
5a
3
P
3
8200mot007
VT