HC500
Analog solenoid driven dosing pump
The electrical system must be in compliance with the regulations in force of the country
where it is built.
The ambient temperature for operation must not exceed 45° C.
1.4 Standards of reference
Our pumps are manufactured according to General Standards in force and in compliance with the following
European Directives:
n° 2004/108/CE " e s.m.i.
n° 2006/95/CE "DBT Low Voltage Directive" e s.m.i.
n° 2011/65/UE , 2012/19/UE "direttive RoHs e WEEE" e s.m.i.
Accordingly, we consider it necessary to follow the contents of this manual carefully,
especially regarding maintenance, in order to obtain an elevated level of reliability and
long-lasting operation.
The manufacturer declines all responsibility for any intervention on the equipment
carried out by unqualified personnel.
1.5 Technical features
General
Power supply: 230VAC ± 15% - 50/60Hz
Average absorption at the maximum frequency of operation: 16 W.
Maximum frequency of operation HC500: 120 BPM (mod. 1), 150 BPM (mod. 2 e 3), 180 BPM
(mod. 4), 75 BPM (mod. 5).
Level input
Connection through a black BNC connector.
Voltage-free contact (NPN transistor).
ADSP7000671
Rev.1.0 09.04.2015
INTRODUCTION
ENGLISH
15