Herunterladen Diese Seite drucken

Esempi Di Programmazione; Description Of The Functions - AQUA HC 797 2T SEC-MIN Gebrauchs- Und Installationsanleitung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Modo ciclico Ton-Toff
In questa modalità la pompa funziona in modo ciclico con un tempo di dosaggio impostato in Ton e un tempo di pausa
impostato in Toff. Durante il tempo di On la frequenza di dosaggio è impostata nella funzione F1.
Il tempo di dosaggio (tempo di On) è impostabile da 1 a 999 secondi
Il tempo di pausa (tempo di Off) è impostabile da 0 a 999 secondi per il modello SEC-SEC e da 0 a 999 minuti per il
modello SEC-MIN
Durante la fase di On sul display scorre come conto alla rovescia il tempo residuo di dosaggio e si illumina il punto Timer
On
Durante la fase di Off sul display compare la scritta Sm (per il modello Secondi-Minuti) e SS (per il modello
Secondi-Secondi), si illumina il punto Timer Off
Funzione costante %
Modo Pausa
In qualsiasi condizione di funzionamento il dosaggio può essere sospeso premendo il tasto ENTER
Nel caso che la pompa abbia la predisposizione per la sonda di livello, la segnalazione di fine livello del liquido dosato
avviene quando appare sul display la scritta " Lo".
Si vuole che la pompa lavori per 1 minuto alla frequenza di 100 imp/min e si fermi per 2 minuti. Quindi
Flow % = 100 imp/min ; Ton = 60 secondi; Toff = 120 secondi (2 minuti)
Premere tasto F e selezionare la funzione F1. Premere il tasto Enter e, a Display lampeggiante, con i tasti Up e
Down selezionare 100, premere il tasto Enter per confermare.
Premere il tasto F e selezionare la funzione ton. Premere Enter e, a Display lampeggiante, con i tasti Up e Down
selezionare 60, premere il tasto Enter per confermare
Premere il tasto F e selezionare la funzione toff . Premere il tasto Enter e, a Display lampeggiante, con i tasti Up e
Down selezionare 120 (se la pompa è del tipo sec-sec) e 2 (se la pompa è del tipo sec-min), premere il tasto Enter
per confermare.
ENGLISH
This dosing pump is endowed with a timer (on/off) and is particularly used for the pulverization of the antibacterial in the
air conditioning systems.
The pump has a cyclic funcion mode with a dosing time Ton and a pause time Toff.
Contant Mode F1
With this mode the pump works as a constant pump. It is possibile to set the number of strokes per minute from 0 up to
105. The display will show the number of strokes per minute and the point % Flow light s up.
Cyclic Mode Ton-Toff
This mode allows the pump to work with a cyclic mode, with a dosing time set on Ton and a pause time set on Toff.
During the On time the dosing frequency is to be set in F1 mode.
It is possible to set the dosing time (On time) from 1 to 999 seconds.
It is possibile to set the pause time (Off time) from 1 to 999 seconds for SEC-SEC model and from 1 to 999 minutes for
SEC-MIN model.
During the phase of On, the display shows a countdown of the dosing remaining time and the point Timer On lights up.
During the phase of Off the display will show the wording Sm (for SEC-MIN model) and Ss (for SEC-SEC model); the
point Timer Off lights up.
Constant Funcion %
Pause Mode
In every functioning mode it is always possibile to stop the dosing pressing the key
20/02/2014
Timer Ton
SEGNALAZIONE DI FINE LIVELLO

ESEMPI DI PROGRAMMAZIONE

DESCRIPTION OF THE FUNCTIONS

Timer Ton
ADSP7000196A HC100-797 2T Rev.2.1
Timer Toff
Timer Toff
ENTER.
2

Werbung

loading

Diese Anleitung auch für:

Hc 100 2t sec-minHc 100 2t sec-sec