Kessel Aqualift Comfort Mono 400V Einbau- Und Betriebsanleitung Seite 38

2.3 Note ATEX fusing
WARNING
The EX marking identifies components and products
that satisfy the ATEX requirement (ATEX Directive
2014/34/EU).
WARNING
Use only ATEX system(s) and explosion-proof com-
ponents for potentially explosive zones. Separate
safety measures have to be taken for potentially
explosive zones:
Carry out an ATEX risk assessment according to
the valid EU Directive and define EX zones.
Check whether the pump(s) and other system
components (incl. accessories) are intended for
ATEX use and satisfy the requirements of the
defined zone.
Check whether the control unit is intended for
joint use with the pumps used and is an ATEX
variant.
In case of doubt, check the standards referred to and the
technical specifications (3.1 "Additional information on ATEX
design").
38 / 204 Installation and operating manual 010-532_06