Accessories; Handling And Installation; Lifting And Transporting The Palletized Machine; Delivery Checks - Tennant CS5 Bedienungsanleitung

Accessories

• Brushes; Soft (SPPV02580 code ); Medium [Standard] (SPPV02438 code ); Hard (SPPV02581
code ).
• Pad Holder (SPPV02582 code ).
• Standard battery (BAAC00192 code).
• Battery charger (BACA00263 code).

Lifting and transporting the palletized machine

The machine comes packed in a cardboard box by the manufacturer.
Handle with care to avoid impact and ensure the machine is not overturned.

Delivery checks

On taking delivery of the machine, check carefully that the packing and machine it contains are
both intact.

Unpacking

When unpacking the machine, proceed as follows:
• Cut and remove the plastic straps using scissors or nippers;
• Open the box:
• Remove the following items from the packaging:
• use and maintenance manual;
• quick guide
•
• bumper wheel;
• front squeegee:
• brush;
• battery charger.
•
• Pull the handle up at right angles to the machine, referring to the section "Adjusting the handle
rake angle"
•
section "Emptying the water/detergent tank" and "Emptying the dirty water tank".
•
• Cut the ties applied to the rear squeegee.
•
•
Keep the packaging materials and store in a safe place: in the event of relocation or shipment
to authorized workshops, the original packaging will ensure that the machine and battery
Fig.2

HANDLING AND INSTALLATION

! WARNING
pack remain undamaged.
1
Fig.2A
1
EN
Fig.2B
11
1