Setting The Time - Baxi LUNA HT 1.450 Gebrauchsanleitung Für Den Verbraucher Und Den Installateur

3.2 Setting the time

IT
DE
GB
CZ
HU
RO
3.3 Setting the maximum cen-
tral heating temperature
3.4 Setting the maximum dome-
stic hot water temperature
3.5 Setting the daily program for
operation in central heating
and domestic hot water modes
3.5.1 Setting the daily times for
central heating mode operation
Downloaded from www.Manualslib.com
a) Press either of the
the display will show the letter P followed by a number (program line);
Figure 3
b) press the
c) press the
d) press the
key to save and exit the programming function;
- Press the key (2-figure 1) to set the central heating water temperature;
- Press the
- press either of the
N.b – With the outdoor sensor probe connected, the
central heating curve. Press the
the premises to be heated.
- Press the key (3-figure 1) to set the maximum domestic hot water temperature;
- Press the
- press either of the
- Press either of the
a) press these keys until the display shows P11, referring to the program start time;
b) press the
- press the key; the display will show P12, referring to the program end time;
- repeat the operations described in points a and b until the third and last cycle is reached (program
line P16);
- press the key to save and exit from the programming function.
manuals search engine
keys to access the programming function;
keys until the display shows P1, referring to the time to be set;
keys to set the time; on the display, the letter P will start to flash;
keys to set the temperature required;
keys (1 or 10 - figure 1) to save and return to the main menu.
keys to decrease or increase the room temperature in
keys to set the temperature required;
keys (1 or 10 - figure 1) to save and return to the main menu.
keys to access the programming function;
keys to set the time;
67 67
key (2 - figure 1) can be used to shift the