Herunterladen Inhalt Inhalt Diese Seite drucken

Baxi LUNA HT 1.450 Gebrauchsanleitung Für Den Verbraucher Und Den Installateur Seite 82

Wandhängende brennwert-gaskessel
Vorschau ausblenden Andere Handbücher für LUNA HT 1.450:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
13.4 Connecting the ou-
IT
tdoor temperature sensor
DE
GB
CZ
HU
RO
Downloaded from
www.Manualslib.com
The SIEMENS model QAC34 outdoor temperature sensor probe (optional accessory) must be con-
nected to terminals 7-8 of terminal board M2 in figure 9.
probe
The procedures for setting the gradient of the temperature curve "kt" vary depending on the acces-
sories connected to the boiler.
a) Without accessories:
The temperature curve "kt" must be selected by setting parameter H532 as described in section 15
"setting the boiler parameters".
See graph 1 for selecting the curve referred to a room temperature of 20°C.
The chosen curve can be shifted by pressing the
modifying the value displayed by pressing the
(The example show in graph 2 refers to the curve Kt=15).
Increase the value displayed if the room temperature required is not reached inside the premises for
central heating.
Graph 1
b) with QAA73 temperature regulator:
The temperature curve "kt" must be selected by setting parameter 70 "HC1 gradient" of the QAA73
temperature control device as described in section 13.3 "QAA73: parameters which can be set by
the installation engineer (service)".
See graph 3 for selecting the curve referred to a room temperature of 20°C.
The curve is shifted automatically on the basis of the room temperature set using the QAA73 climate
control.
If the system is divided into zones, the temperature curve "kt" relating to the part of the system not
controlled by the QAA73 must be selected by setting parameter H532 as described in section 15
"setting the boiler parameters".
IMPORTANT: For systems divided into zones, parameter 80 "HC2 gradient", which can be set on
the QAA73 temperature regulator, must be set as _ _ . _ "not active" (see section 13.3).
Graph 3
manuals search engine
(2), button (2) on the boiler control panel, and
and
. keys. See graph 2 for curve selection.
TM = Flow temperature
Te = Composite outside temperature
Sth = Kt Curve
TM = Flow temperature
Te = Composite outside temperature
82 82
Graph 2

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Luna ht 1.550Luna ht 1.650

Inhaltsverzeichnis