EuroLite LED TMH-S200 Bedienungsanleitung Seite 30

Invert PAN
With this function, you can reverse the PAN-movement.
Invert TILT
With this function, you can reverse the TILT-movement.
PAN-TILT Swap
With this function, you can swap PAN and TILT.
PAN-TILT Encoder / automatic PAN/TILT correction (Feedback)
With this function, you can correct the PAN/TILT movement to the programmed position.
DMX signal / action if no DMX
With this function, you can "keep" or "clear" the DMX value if there is no DMX-signal.
Dimmer speed (step response)
The dimmer is available in two different versions – with the response characteristics of halogen lamps (ON)
and response characteristics of LEDs (OFF).
Linear color / switch color change from step to linear color
With this function, you can select the linear change of the color wheel.
Load default
With this function, you can restore the factory settings of the device. All settings will be set back to the
default values (shaded).
Manu
Test function of each channel
With this function you can test each channel on its (correct) function.
Sys
Ver
With this function, you can display the software version of the device.
Reset Cal
With this function, you can calibrate the channels to their correct positions.
System errors
With this function, you can display error messages.
DMX monitor
With this function, you can display the current DMX addresses of the channels.
180° / display reverse
With this function, you can flip the display by 180° for a better view when the fixture is hung from the truss or
a ceiling.
°C / Show temperature
With this function, you can display the temperature in the projector-head.
Display language select
With this function, you can select the desired display language (English or Chinese).
30/36 00128934, Version 1.0