Super Power Function; Timer - Novy 1786-1 Montageanleitung Und Bedienungsanleitung

Super Power function

The Super Power function grants a boost of power.
The Super Power function has 2 power levels:
 1
st
level Power displayed by [ P ]
 2
nd
level Super Powerr alternately displayed by 2 and 4 vertical segments [
[ P ].
If this function is activated the heating zone works during 10 minutes with an ultra high power.

Start up / Stop Super Power function:
Action
Selection of the zone
Start up Super Power
Stop the Super Power
 Power management
The hole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
 Setting and modification of the "Egg Timer"
The "Egg Timer" is independent from the heating zones. If this timer is on and you stops the
hob, the "Egg Timer" will continue until the end of the time.
Action
To start:
To select the "Egg Timer"
Decrease the time
Increase the time
When the time reaches [00.] it is blinking and beeping.
 To stop the "Egg Timer"
Action
To select the "Egg Timer"
To stop the "Egg Timer"
 Setting and modification of the cooking time of a heating zone
Action
To select a heating zone
To select the power level
Control panel
Press key [ + ] or [ - ]
Press key [ P ]
re-press key [ P ] then [ + ]
Press key [ - ]
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Control panel
Touch the key [ 0/I ]
press once on timer key
[ - ] and [ + ] simultaneously
Press on timer key [ - ]
Press on timer key [ + ]
Control panel
Press once on timer key
[ - ] and [ + ] simultaneously
Press on timer key [ - ]
Press second time on
timer key [ - ]
Control panel
Press on key [ + ]
Press on key [ + ] or [ - ]
51
Display
[ 4 ] or [ 9 ]
[
[ 9 ]
(example: power level 9)
Display
[ 0 ]
[00]
[30] wents to 29,28,27,
the time increases...
Display
the time displays
displays [01]
displays [00]
Display
[ 4 ]
[ 1 ] to [ 9 ]
] and
and P ]