Indesit p 604 Installation Und Gebrauch Seite 9

Electrical wire hook-up
Attach to the wire a plug of the type indicated by the tag.
In the case of direct hook-up to electrical source it is
necessary to place between the plug and the source an
3 4 5
1 2
Cooking table description
A
B
C
9
omnipolar switch with a minimum distance of 3mm
between the contacts appropriate to the load and in
keeping with the regulations in vigour (the earth wire need
not be interrupted by the switch). The main supply wire
must be placed in such a spot as to not superate 50°C
above room temperature. Before actual hook-up make sure
that:
•
The fuse and main breaker of the electrical system
can withstand the load required by the appliance,
•
That the electrical supply system is equiped with an
efficient earth hook-up according to the norms and
regulations prescribed by law.
•
That the plug or switch are easily accessible.
Important: When the appliance is installed over a built-in
oven, for safety, the electrical connections of the hob and
oven must be installed separately. This also ensures easy
removal of the oven, if necessary.
A Electric plate
B Pilot lamp of the electric plates
C Control knobs for the cook-top electric plates