Warnings; Definitions; Qualified Person - Siemens SIMOREG K 6 RA 22 Serie Betriebsanleitung

SIMOREG K
2

Warnings

WARNING
Hazardous voltages are present in this electrical equipment during operation.
Non-observance of the safety instructions can result in severe injury or damage
to property.
Only qualified personnel should work on or around this equipment after
becoming thoroughly familiar with all warnings, safety notices and maintenance
procedures contained herein.
The successful and safe operation of this equipment is dependent on proper
handling, installation, operation and maintenance.

2.1 Definitions

• Qualified person

For the purpose of this instruction manual and product labels, a "qualified person" is one who is
familiar with the installation, construction, commissioning and operation of the equipment and
the hazards involved.
In addition, he or she has the following qualifications:
- Is trained and authorized to energize, de-energize, clear, ground and tag circuits and
equipment in accordance with established safety practices.
- Is trained in the proper care and use of protective equipment in accordance with established
safety practices.
- Is trained in rendering first aid.
• Danger
For the purpose of this instruction manual and product labels, "Danger" implies that death,
severe personal injury or substantial damage to property will result if proper precautions are not
taken.
• Warning
For the purpose of this instruction manual and product labels, "Warning" implies that death,
severe personal injury or substantial damage to property may result if proper precautions are
not taken.
• Caution
For the purpose of this instruction manual and product labels, "Caution" implies that minor
personal injury or damage to property may result if proper precautions are not taken.
• Note
For the purpose of this instruction manual, "Note" signifies information about the product or the
respective part of the instruction manual to which particular attention is drawn.
- 38 -
June 1998 Operating Instructions 6RX1220-0DD74
6RA22 -8DD21-
Siemens AG ATD TD 6