Inhaltsverzeichnis
Werbung
1
Field of application
Only the techniques
shown in the
diagrams that
This equipment is personal protective
are not crossed
equipment (PPE). Handled rope clamp
out and/or do not
for use in tree-care work with double
display a skull and
rope technique (10-13 mm ropes with
crossbones symbol
sheath + core that meet applicable
are authorized.
standards).
This product must not be loaded
Check our Web site
beyond its strength rating, nor be used
regularly to fi nd the
for any purpose other than that for
latest versions of
which it is designed.
these documents:
WARNING
www.petzl.com.
Contact PETZL
Activities involving the use of
if you have any
this equipment are inherently
doubt or diffi culty
dangerous.
understanding
You are responsible for your own
these documents.
actions and decisions.
Before using this equipment, you must:
- Read and understand all instructions
for use.
- Get specifi c training in its proper use.
- Become acquainted with its
capabilities and limitations.
- Understand and accept the risks
involved.
Failure to heed any of these
warnings may result in severe
injury or death.
3
Inspection, points to verify
Before each use
Verify that the product is free of cracks, deformation,
marks, wear, corrosion, etc.
Check the condition of the frame, holes, cams and
safety catches, springs and cam-axles.
WARNING, do not use a rope clamp that has missing
or worn-out teeth.
Consult the details of the inspection procedure to be
carried out for each item of PPE on the Web at www.
petzl.com/ppe or on the PETZL PPE CD-ROM.
Contact PETZL if there is any doubt about the
condition of this product.
5
Working
principle
The rope clamp slides along the rope
in one direction and jams in the other
direction.
The teeth on the cams initiate a clamping
action that pinches the rope between the
cam and the frame.
2
B19 ASCENTREE
B195000A (290508)
Responsibility
WARNING, specifi c training in the
activities defi ned in the fi eld of
application is essential before use.
This product must only be used by
competent and responsible persons, or
those placed under the direct and visual
control of a competent and responsible
person.
Gaining an adequate apprenticeship in
appropriate techniques and methods of
protection is your own responsibility.
You personally assume all risks and
responsibilities for all damage, injury
or death which may occur during or
following incorrect use of our products
in any manner whatsoever. If you are
not able, or not in a position to assume
this responsibility or to take this risk,
do not use this equipment.
During each use
It is important to regularly monitor the condition
of the product and its connections to the other
equipment in the system. Make sure that all pieces
of equipment in the system are correctly positioned
with respect to each other.
WARNING, be careful of:
- foreign objects which can impede the operation of
the cams (twigs, resin, etc.).
- situations where the safety catches can snag and
cause the cams to open.
6
Installation
Pull the safety catches down and hook them on the frame of the
device. The cams are thus held open.
Put the ropes in place. Pay attention to the Up/Down indicator.
Unhook the safety catches so that the cams press against the ropes.
Connect your lanyard to the lower hole with a locking carabiner.
To remove the rope
Slide the device up the ropes and disengage the cams using the safety
catches.
2
Nomenclature of parts
(1) Upper holes, (2) Cam, (3) Safety catch, (4) Lower
connection hole, (5) Handle.
Principal materials: aluminum alloy frame, chrome-
plated steel cam, nylon safety catch, dual-density
elastomer grip.
1
5
4
Compatibility
Verify that this product is compatible with
the other elements of the system in your
application (compatible = good functional
interaction).
Connectors
Make sure your connectors are compatible
with the rope clamp (shape, size, etc.).
Any equipment used with your rope clamp
must conform to applicable standards and
regulations.
1
2
3
5
4
Werbung
Inhaltsverzeichnis
