Replacing The Lamp; Troubleshooting - Electrolux EOB5440BAX Benutzerinformation

screen-printing zones is not rough when
you touch it.
Make sure that you install the middle
panel of glass in the seats correctly.

11. TROUBLESHOOTING

11.1 What to do if...
Problem
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
Downloaded from www.Manualslib.com
A B
WARNING!
Refer to Safety chapters.
manuals search engine

10.7 Replacing the lamp

Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are
not set.
ENGLISH
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
CAUTION!
Always hold the halogen
lamp with a cloth to prevent
grease residue from burning
on the lamp.
Remedy
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
23