Electrolux EOB5440BAX Benutzerinformation Seite 22

22 www.electrolux.com
5. Lift and turn the lever on the left
6. Close the oven door halfway to the
7. Put the door on a soft cloth on a
8. Release the locking system to
Downloaded from www.Manualslib.com
hinge.
first opening position. Then pull
forward and remove the door from its
seat.
stable surface.
remove the glass panels.
manuals search engine
9. Turn the two fasteners by 90° and
remove them from their seats.
10. First lift carefully and then remove
the glass panels one by one. Start
from the top panel.
1
11. Clean the glass panels with water
and soap. Dry the glass panels
carefully.
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite
sequence.
Make sure that you put the glass panels
(A and B) back in the correct sequence.
The first panel (A) has a decorative
frame. The screen-printing zone must
face the inner side of the door. Make
sure that after the installation the surface
of the glass panel frame (A) on the
90°
2