Setup - Storch Airless ST 2000 Bedienungsanleitung

Setup

When unpacking sprayer for the first time or after long
term storage perform setup procedure. When first setup is
performed remove shipping plug from fluid outlet.
1. Connect airless hose to sprayer. Tighten securely.
2. Engage the trigger lock.
3. Remove nozzle protector and connect Airless hose to
gun.
4. Check inlet strainer for clogs and debris.
5. Fill the packing nut with piston oil to prevent pre-
mature wear of the seal. Repeat whenever you use the
device.
6. Turn power OFF.
7. Plug power supply cord into a properly earthed electri-
cal outlet.
8. Turn circulation switch down DRAIN position.
169 Original instruction