Residual Risks - Black+Decker BEHTS551 Bersetzung Der Ursprünglichen Anweisungen

Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional power tool safety warnings
@
Warning! Additional safety warnings for hedge
trimmers
Keep all parts of the body away from the cutter blade.
u
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material. A moment of inattention
while operating the tool can result in serious personal
injury.
Carry the hedge trimmer by the handle with the cutter
u
blade stopped. When transporting or storing the
hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce possible
personal injury from the cutter blades.
When transporting or storing the hedge trimmer,
u
always fit the blade cover. Proper handling of the hedge
trimmer will decrease the risk of personal injury from the
blades.
When clearing jammed material or servicing the unit,
u
make sure all power switches are off and the power
cord is disconnected. Unexpected actuation of the
hedge trimmer while clearing jammed material or servicing
may result in serious personal injury.
Do not use the hedge trimmer in bad weather condi-
u
tions, especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
Hold the power tool by insulated gripping surfaces
u
only, because the cutter blade may contact hidden
wiring or its own cord. Cutter blades contacting a "live"
wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Keep all power cords and cables away from cutting
u
area. Power cords or cables may be hidden in hedges or
bushes and can be accidentally cut by the blade.
The intended use is described in this instruction
u
manual. The use of any accessory or attachment or per-
formance of any operation with this tool other than those
recommended in this instruction manual can present a risk
of personal injury and/or damage to property.
If you have not used a hedge trimmer before, prefer-
u
ably seek practical instruction by an experienced user
in addition to studying this manual.
(Original instructions)
Never touch the blades while the tool is running.
u
Never attempt to force the blades to come to a stand-
u
still.
Do not put the tool down until the blades have come
u
to a complete standstill.
Regularly check the blades for damage and wear. Do
u
not use the tool when the blades are damaged.
Take care to avoid hard objects (e.g. metal wire, rail-
u
ings) when trimming. Should you accidentally hit any
such object, immediately switch the tool off and check for
any damage.
Should the tool start to vibrate abnormally, immedi-
u
ately switch it off and disconnect it from the mains
suply then check for any damage.
If the tool stalls, immediately switch it off. Disconnect
u
it from the mains supply before attempting to remove any
obstructions.
After use, place the blade sheath supplied over the
u
blades. Store the tool, making sure that the blade is not
exposed.
Always ensure that all guards are fitted when using
u
the tool. Never attempt to use an incomplete tool or a tool
with unauthorised modifications.
Never allow children to use the tool.
u
Be aware of falling debris when cutting the higher
u
sides of a hedge.
Always hold the tool with both hands and by the
u
handles provided.
Check the hedges and bushes for foreign objects, e.g.
u
wire fences and hidden wiring.
Before operating the hedge trimmer, the user should
u
make sure the locking device(s) of any moving ele-
ments (e.g. the extended shaft and pivoting
element), if any, are in the locked position.

Residual risks

Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving parts.
u
Injuries caused when changing any parts, blades or ac-
u
cessories.
Injuries caused by prolonged use of a tool. When using
u
any tool for prolonged periods ensure you take regular
breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust developed when
u
using your tool (example:- working with wood, especially
oak, beech and MDF.)
ENGLISH
5