FIMAR TV2000R Benutz Und Wartungsanleitung Seite 45

If it is the first time the appliance is used, remove any protective linings and accu-
rately clean to remove any construction material residue before starting it.
APPLIANCE CLEANING
Before cleaning the appliance (at the end of the day or when necessary) turn the power
off (or unplug the power cord).
1 - Remove the disk carriage lid and remove the utensils. Wash, rinse and dry them thor-
oughly.
2 - Reassemble the utensils and the disk carriage lid.
3 - Accurately clean the work surface and all surrounding areas.
4 - Clean external appliance surfaces with a damp cloth or sponge.
Caution - Precaution
Only clean with food safe detergents. Never use corrosive or flammable cleaning
products or products that contain substances harmful to human health.
For long periods of disuse, after cleaning and turning off appliance power (or unplugging
the power cord), adequately cover it to keep it clean.
TROUBLESHOOTING
The purpose of the following information is to help the operator to identify and correct
any anomalies or malfunctions that may occur during use.
Some faults may be resolved by the user, others require specific technical skills or abilities
and must only be performed by qualified personnel with recognised experience in the specific
sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 6: Operating malfunctions
Problem
The equipment does not start.
The tool rotation direction is
incorrect.
Translation of the original instructions
Causes
Main switch off.
No mains power.
The presser was not lowered.
Fuse burnt-out.
Appliance power phase wires are
incorrectly connected.
- 21 -
MOZZARELLA GRATER
TAC-TAS
Solutions
Turn on main switch.
Contact your dealer or authorised
service centre.
Lower the presser.
Contact customer service.
Have an expert technician invert
power wires.
English language
GB