Leckey Mygo Benutzerhandbuch Seite 79

supporting the head and shoulders, move
the client into a horizontal position. Open the
knee straps and sandal straps. Loosen the
Allen (a) bolt on both sides of the swinging
footplate ensuring the weight of the user's
knees are supported by a carer, adjust the
angle of the swinging footplate as necessary,
always taking care to assess the client's
comfort, and retighten the bolts securely.
Then secure the knee straps and sandal
straps. Return the client to prone standing
position.
In supine standing:
Assess the client's range of movement,
muscles tone, etc, on a plinth and determine
the optimum standing posture before
positioning the client in the stander. Position
the client in the Mygo stander and move it
into a horizontal position. Open the knee
straps and sandal straps. Loosen the
Allen bolt (a) on both sides of the swinging
footplate ensuring the weight of the user's
knees are supported by a carer, adjust the
angle of the swinging footplate as necessary,
always taking care to assess the client's
comfort, and retighten the bolts securely.
Then secure the knee straps and sandal
straps. Return the stander to preferred
supine standing angle.
B
9.5 Positioning the sandals
Each sandal is attached to the individual
footplate with a single fixing bolt. The
footplate is encapsulated in rubber to ensure
the sandals do not slide when secured.
To position the user's feet in the sandals
secure the Velcro straps provided so the foot
is held in place. The straps should be over
the bridge of the foot and over the toes. The
front strap can be fed through one of two
slots on either side of the sandals, depending
on the size of the user's feet (2).
If the child is wearing sandals or light
footwear check the straps to make sure
the webbing does not irritate the skin.
1
2
Supine
Configuration
A