Leckey Mygo Benutzerhandbuch Seite 63

7.5 Attaching the Sandals
Place the sandal so that the attachment bolt
goes through the slot in the footplate. To secure,
on the underside of the footplate place the rubber
washer (a), followed by the metal washer (b) and
then the knob (c) onto the attachment bolt. To
position the sandals, simply loosen the knob
(c) under the footplate, select the position you
require and re-fasten the knob.
1
B
C
2
C
A
7.6 How to attach the
shoulder support for
supine standing
To attach the shoulder support to the stander,
insert the Allen bolt into the bottom hole on
the back of the chest support as shown (a).
Place the shoulder support onto the inserted
Allen bolt and secure with the two further
Allen bolts supplied (b).
A