Leckey Mygo Benutzerhandbuch Seite 59

To assemble the product with the stander
upright, lift it up from the cross bar (a), place
vertical tubes in between the free lugs on the
chassis and line up the holes (b) (the groove
in the vertical tube should help with the
location).
A
B
C
Add the bolts and tighten (c). Repeat this
on the other side. Then lift up the manual
actuator to the free lugs on the cross bar and
line up the holes, then add bolts and tighten
(d).
A
B
D
D