Dismantling And Disposal - ProMinent DULCO Trans 40/1000 PVDF Betriebsanleitung

Cleaning ater operation, Measures after use, Dismantling and Disposal
Cleaning after each operation
 Clean the pump by flushing an appropriate cleaning agent.
 Do not remove motor from the pump as long as there is
 Do not use flammable liquids to clean the pump.
 The pump and hose must be compatible with
 The pump should not be immersed deeper into
Dismantling of pump for cleaning :
Measures after use
Attention!
 Empty pump, hose and fittings after every use.
 Drain hand nozzle after use. Otherwise liquid being contained

Dismantling and Disposal

 Pump, hose and fittings must be emptied prior to dismantling.
 Collect environmentally harmful substances and liquids in
 Dispose of scrap material and parts that cannot be repaired or
17
Downloaded from www.Manualslib.com
First pump the cleaning agent in circuit, then rinse with
clean detergent.
any back pressure.
 Before removing the motor from the pump, completely
drain pump, flexible hose and hand nozzle.
the cleaning agent.
the cleaning agent than the outlet connection.
1. Remove the plug.
1. Release union nut between motor and pump.
2. Remove the motor.
3. Remove inner tube from the pump.
within the outlet tube will flow out without control.
 Prior to dismantling the outlet tube switch the pump off and
disconnect the mains.
appropriate containers and dispose of them in an environmen-
tally sound manner.
reused in an environmentally sound manner.
manuals search engine