Description of Motor, Sound intensity level, Safety instructions hand nozzle
Integral no-volt release
Sound intensity level
Safety instructions Hand nozzle
Transfer clean and uncharged liquids only.
Do not exceed maximum operating pressure of 2 bar at 60°C.
When filling into a container, make sure that no excess
Do not transfer liquid at high speed to avoid splashing
Comply with all relevant safety instructions.
Ensure that the hose is securely fixed to the hosetail.
Do not mechanically overstress swivel joint. Hand nozzle
The hand nozzle may not be used for liquids which are
Never leave the hand nozlzle unattended, because
15
Downloaded from
www.Manualslib.com
Motors with the integral no-volt release function are secured
against accidental start-up following
interruption of the operating voltage (see rating plate U<)
Motors with the no-volt release function cannot be remote-
controlled.
The motor can only be restarted by pressing the on/off button.
The sound intensity level of this pump is = 75 dB (A)
(measured on the manufacturer's pump test stand)
pressure will be built up - danger of liquid splashing.
of liquids.
Wear appropriate protective clothing.
(face shield, protective gloves, etc.)
is not appropriate for pulling the flexible hose.
To avoid mechanical stress on the hand nozzle,
slightly bend the flexible hose only.
not compatible with its materials of construction (nozzle housing,
nozzle valve, seal, hose ...). Also confer to resistance chart.
it does not close automatically.
manuals search engine
.