Safety instructions motor, pump
Safety instructions Motor, Pump
In case of emergency remove the plug
The motor is not explosion-proof.
Never leave the pump unattended.
Do not operate the pump in hazardous locations.
Do not use the pump for transferring flammable liquids.
Only use the pump for its intended purpose.
Never leave the pump unattended.
The pump should be used in vertical position only.
Install the pump in a way which ensures that it cannot
Regularly check the hose and pump to ensure safe operation.
Regularly check the motor according to the relevant national
Make sure that the motor will not start unintentionally.
The pump should not be immersed deeper into the liquid
The pump should only be left standing in the liquid
Only use the pump up to max. 60°C liquid temperature.
Surrounding temperature: 0°C up to max. +40°C
Comply with all relevant safety instructions.
Keep the air escaping and the displacement in mind when
Install appropriate splash guards for open barrels or containers.
Remove spilled liquid from the floor and dispose of it in an
Never operate the pump dry.
Do not expose the pump to the weather.
Clean the pump after each operation.
Never store the pump in areas in which corrosive vapours exist.
13
Downloaded from
www.Manualslib.com
fall into the container.
safety instructions and/or rules for prevention of accidents
(in Germany these are e.g. BGV A3).
than the outlet connection.
as long as in operation.
Wear appropriate protective clothing.
(face shield, protective gloves, etc.)
immersing the pump in the liquid. Lower the pump carefully.
environmentally sound manner.
manuals search engine
.
.