CHIEF iC Serie Installationsanleitung Seite 14

iCMPSA4
3A
(C)
2
14
Downloaded from www.Manualslib.com
1
(BB) x 4
(M) x 2
3
manuals search engine
(CC) x 4
6
(E) x 2
Attaching Center Bracket
1. Attach center bracket (C) to vertical mounting brackets (E)
using four M4 x 12mm Phillips head screws (N) and four
#10 flat washers (BB).
2. Attach iCMPSA4 to bracket using two M4 x 8mm Phillips
head cap screws (M) in the upper two mounting holes.
3. Complete attachment of iCMPSA4 using two M4 x 8mm
Phillips head cap screws (M) in the lower two mounting
holes.
4. Proceed to Step 3B.
(N) x 4
(M) x 2
Installation Instructions
(BB) x 4
[Only used
with screws
N or P]
(N through AA) x 4