Specifications - Makita HR2470 Bedienungsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
Downloaded from www.Manualslib.com
Model
Concrete Tungsten-carbide
tipped bit
Core bit
Diamond core bit
(dry type)
Steel
Wood
-1
No load speed (min )
Blows per minute
Overall length
Net weight
Safety class
) : 90 dB (A)
pA
) : 101 dB (A)
WA
Wear ear protection
2
) : 12.5 m/s
h,CHeq
2
2
) : 15.5 m/s
h,HD
2
2
) : 4.5 m/s
h,D
2
manuals search engine
HR2470/HR2470F
0 - 1,100
0 - 4,500
370 mm
2.9 kg
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Rotary Hammer
Model No./ Type: HR2470, HR2470F, HR2470FT,
HR2470T
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
Yasushi Fukaya
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
5 ENGLISH
HR2470T/HR2470FT
24 mm
54 mm
65 mm
13 mm
32 mm
394 mm
3.0 kg
/II
Director