Instructions For Assembly; List Of Spare Parts - Kettler Track Motion Montageanleitung

GB
the manufacturer cannot be held liable. If, in spite of this, child-
ren are allowed to use the equipment, ensure that they are in-
structed in its proper use and are supervised accordingly
Always wear suitable shoes (running shoes) when using the run-
■
ning belt.
Before beginning your first training session, familiarize yourself
■
thoroughly with all the functions and settings of the unit.
If the equipment is in regular use, check all its components
■
thoroughly at appropriate intervals. Pay particular attention to
the tightness of bolts and nuts.
In case of a regular use of the running belt, the cold running belt
■
has to be serviced with silicone oil.
Depending on the degree of use and load to which the unit is
■
subjected, the belt may tend to stretch or slip. Tighten the belt
as described. Adjust the tightness of the belt as described in sec-
tion „handling".

Instructions for Assembly

Ensure that you have received all the parts required (see check
■
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
■
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
Please note that there is always a danger of injury when wor-
■
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
Ensure that your working area is free of possible sources of dan-
■
ger, for example don't leave any tools lying around. Always dis-
pose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children
play with plastic bags!
The equipment must be assembled with due care by an adult
■
List of spare parts page 36-38
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no. 07881-300 / spare-part no. 68006339
/ 2 pieces / S/N .................... Please keep original packaging
of this article, so that it may be used for transport at a later date,
if necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the original
box if possible. It is important to provide a detailed defect de-
scription / damage report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
Observe the movement of the edge of the belt when it is in use.
■
If it tends to run towards the side, readjust it accordingly.
Running Tip: Running straight on the treadmill is made easier by
focussing on a fixed object in front of you in the room. Run as
if you wanted to approach the object.
Importantly: Please keep the safety key in a safe place and ensu-
re that it is kept out of reach of children!
Care and Maintenance
Do not use corrosive or abrasive materials to clean the equip-
■
ment. Ensure that such materials are not allowed to pollute the
environment.
The electrical elements and components do not require special
■
maintenance. No alterations or repairs (except mantainance
checks) should be made to these parts unless by a qualified el-
ectrician.
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
The fastening material required for each assembly step is sho-
■
wn in the diagram inset. Use the fastening material exactly as
instructed.
Bolt all the parts together loosely at first, and check that they
■
have been assembled correctly. Tighten the locknuts by hand un-
til resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all
screw connections have been tightened firmly. Attention: once
locknuts have been unscrewed they no longer function correctly
(the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out prelimi-
■
nary assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its use-
ful life please dispose of this article correctly and sa-
fely (local refuse sites).
GB KETTLER GB Ltd.
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
+44 1527 591901
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 62423
Mail: sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333
5