Network Channel Scan; Analog Fine Tune; First Time Installation; Clear Service List (*) - Finlux 40FLHD971 Bedienungsanleitung

Network Channel Scan

Select Network Channel Scan from the installation
menu by using " " or " " and OK buttons. Network
Channel Scan selection screen will be displayed.
Select Digital Aerial or Digital Cable and press
OK button to continue. The following message will
be asked. Select Yes to continue or select No to
cancel.
If you start Digital Aerial scan process, automatic
scanning will start. You can press "MENU" button
to cancel.
If you start Digital Cable scan process, the following
screen will be displayed.
You can select frequency ranges from this screen. For
highlighting lines you see, use " " or " " button. You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
Stop Frequency as desired by using numeric buttons
on the remote control. After this operation, you can set
Search Step as 8000 KHz or 1000 KHz. If you select
1000 KHz, the TV will perform search process in a
detailed way. Searching duration will thus increase
accordingly. When fi nished, press OK button to start
automatic search. Automatic searching screen will be
displayed during the process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 68 A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 68

Analog Fine Tune

• Select Analog Fine Tune from the Installation menu
by using " " or " " and OK buttons. Analog Fine
Tune screen will be displayed. Analog Fine Tune
feature will not be available if there are no analog
channels, digital channels and external sources
stored.
• Press OK button to proceed. Use " " or " " button
to set Fine Tune. When fi nished, press OK button
again.

First Time Installation

If you want to delete all channels and settings please
select First Time Installation and press OK. The
TV's memory will be deleted and installation progress
starts.

Clear Service List (*)

(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press "
" or " " button to select Clear Service List and then
press OK. The following OSD will be displayed on
the screen:
Select YES and press OK to continue or select NO
and press OK button to cancel.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
• Press " MENU" button to view main menu. Select
Channel List item by using " " or " " button. Press
OK to view menu contents.
Select Edit Channel List to manage all stored
channels. Use " " or " " and OK buttons to select
Edit Channel List.
English - 68 -
24.10.2011 12:58:03 24.10.2011 12:58:03