Confi Guring Picture Settings; Operating Picture Settings Menu Items; Picture Settings Menu Items - Finlux 40FLHD971 Bedienungsanleitung

Cinema
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
Confi guring Picture Settings
You can use different picture settings in detail.
Press "MENU" button and select the Picture icon
by using " " or " " button. Press OK button to view
Picture Settings menu.

Operating Picture Settings Menu Items

• Press " " or " " button to highlight a menu item.
• Use " " or " " button to set an item.
• Press " MENU" button to exit.
Pixellence Demo: While Mode option is highlighted in
picture menu, Pixellence Demo mode will be displayed
bottom of the menu screen.
Pixellence Demo function optimizes the TV's video
settings and helps to acquire a better image quality.
Pixellence Demo thus includes contrast, sharpness,
colour enhancement and skin tone correction along with
the skin tone detection.
Press OK to start Pixellence Demo for experiencing
Pixellence quality. Throughout the demo mode, the
screen is splitted into two sections, one displaying the
Pixellence active area; the other displaying the normal
broadcast. Press OK button to quit the demo mode.
A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 76 A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 76

Picture Settings Menu Items

Mode: For your viewing requirements, you can set
the related mode option. Picture mode can be set to
one of these options: Cinema, Game, Dynamic and
Natural.
Contrast: Sets the lightness and darkness values of
the screen.
Brightness: Sets the brightness value for the screen.
Sharpness: Sets the sharpness value for the objects
displayed on the screen.
Colour: Sets the colour value, adjusting the colors.
Power Save Mode: Use " " or " " button to select
Power Save Mode. Press " " or " " button to set Power
Save Mode as Eco, Picture Off and Disabled. See the
section, "Environmental Information" in this manual for
further information on Power Save Mode.
Backlight: This setting controls the backlight level and
it can be set to Low, Medium, High and Auto.
Noise Reduction: If the broadcast signal is weak and
the picture is noisy, use Noise Reduction setting to
reduce the noise amount. Noise Reduction can be set to
one of these options: Low, Medium, High or Off.
Advanced Settings
Use " " or " " button to select advenced settins.
Dynamic Contrast: You can change contrast rate by
using dynamic contrast function. Dynamic contrast can
be set to one of these options: Low, Medium, High
or Off.
Colour Temp: Sets the desired colour tone.
Picture Zoom:Sets the picture size to Auto,16:9,
Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema.
English - 76 -
24.10.2011 12:58:10 24.10.2011 12:58:10