Configuring Wired Network Settings In Advanced Mode - Finlux Lugano50FL/UHD Bedienungsanleitung

use the Media Browser screen to access and play
shared network files.
• PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with a wired
connection for higher playback quality.
To configure wired settings please refer to the
Network Settings section in the Settings menu.
• You might be able to connect your TV to your LAN
depending on your network's configuration. In such
a case, use an ethernet cable to connect your TV
directly to the network wall outlet.
LAN input on the rear
bottom side of the TV
Configuring Wired Device Settings
Network Type
The Network type can be selected as Wired or Wireless,
in accordance with the active connection to the TV set.
Select this as "Wired" if you are connecting via an
ethernet.
Configuration Status
This section displays the status of the connection.
IP Address
If an active connection is available, the IP address will
be displayed on this section. If you want to configure an
IP address preferences, press the GREEN button and
switch to the advanced mode.
Configuring Wired Network Settings in
Advanced Mode
After pressing the GREEN button, the "Advanced
mode" will be available. While in Advanced Mode,
press the RED button to edit settings. When finished,
press OK to save, Press RETURN/BACK to cancel.
Wireless Connectivity
To Connect to a Wireless Network
IMPORTANT: "Veezy 200" USB dongle is required to
use wireless network features.
• To make your modem's SSID visible, you should
change your SSID settings via the modem's
software. The TV cannot connect to the networks
with a hidden SSID.
Downloaded from www.Manualslib.com
network wall
socket
manuals search engine
To Connect to a wireless LAN, you should perform
the following steps:
1. Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
2. Then connect the wireless adaptor to one of the
USB inputs of the TV.
3. To configure your wireless settings please refer
to the Network settings section in this manual.
• A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed
to increase bandwidth. These are optimized for
smoother and faster HD video streaming, file
transfers and wireless gaming.
• Use a LAN connection for quicker file sharing
between other devices like computers.
• The frequency and channel differ depending on the area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic
and the products that you use. The transmission may
also be cut off or may get disconnected depending
on the radio wave conditions, DECT phones or any
other WiFi 11b appliances. The standard values of
the transmission speed are the theoretical maximum
values for the wireless standards. They are not the
actual speeds of data transmission.
• The location where the transmission is most effective
differs depending on the usage environment.
• The Wireless LAN adaptor should be connected directly
to the TV's USB port. USB hubs are not supported. You
can plug your wifi dongle into the supplied dock In
cases where network quality is poor and the wifi
dongle needs to be placed to a location with better
signal quality.
• The Wireless LAN adaptor supports 802.11 a,b,g &
n type modems. It is highly recommended that you
should use the IEEE 802.11n communication protocol
in order to avoid any possible problems while watching
videos.
• Use the other USB input, if you experience problems
with audio/video performance.
English - 48 -
Broadband
ISP
connection
Wireless LAN
adaptor
USB inputs
on the rear
side of the TV