Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remote Control Handset
Inserting Batteries
•
Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
•
Insert two
AAA/R3 or equivalent type batteries
inside. Insert two AAA/R3 or equivalent type
batteries inside. Observe the correct polarity (+/-)
when inserting batteries and replace the battery
cover.
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.
Switching On/Off
To Switch the TV On
•
Connect the power cord to the 220-240V AC, 50
Hz socket.
•
Press STANDBY touch button. Then the standby
LED lights up.
•
To switch on the TV from standby mode either:
•
Press the "
" button, P+ / P- or a numeric button
on the remote control.
•
Press the
-P/CH or P/CH+ touch button on the TV.
The TV will then switch on.
Note:
If you switch on your TV via standby button on the
remote control, the programme/source that you were watching
last will be reselected. The TV will switch on with the last
selected channel number, regardless of the channel number
that you select from the remote control to switch on the TV.
By either method the TV will switch on.
To Switch the TV Off
•
Press the "
" button on the remote control or press
the STANDBY touch button on the TV, so the TV will
switch to standby mode.
•
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active. The LED can also blink when you switch on
the TV from standby mode.
A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 62
A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 62
Digital Teletext (** for UK only)
• Press the "
" button.
•
The digital teletext information appears.
•
Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
•
When Press "
OK" button or similar message appears
on the screen, press the OK button.
•
When the "
" button is pressed, the TV returns to
television broadcasting.
•
With digital broadcasting (DVB), in addition to digital
teletext broadcasting together with the normal
broadcasting, there are also channels with just digital
teletext broadcasting.
•
The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
•
When you press the "
teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
"TELETEXT" explanations.
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press "SOURCE" button on your remote control
consecutively for directly changing sources.
English - 62 -
" button again, the digital
24.10.2011 12:57:57
24.10.2011 12:57:57
Werbung
Kapitel
Inhaltsverzeichnis
