Finlux 40FLHD971 Bedienungsanleitung Seite 66

• Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
If you select CABLE option and press OK button on
the remote control to continue, the following message
will be displayed on the screen:
To continue please select YES and press OK. To
cancel operation, select NO and press OK.
You can select frequency ranges from this screen. For
highlighting lines you see, use " " or " " button. You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
Stop Frequency as desired by using numeric buttons
on the remote control. After this operation, you can set
Search Step as 8000 KHz or 1000 KHz. If you select
1000 KHz, the TV will perform search process in a
detailed way. Searching duration will thus increase
accordingly. When fi nished, press OK button to start
automatic search.
If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 65 A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 65
Note: You can press "MENU" button to cancel.
• After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN, please select
"Yes" and than press "OK".
• Press OK button to quit channel list and watch TV.
If you select Satellite option from the Search Type
screen, you can set a satellite and watch satellite
channels.
There are three types of antenna selection. You can
select Antenna type as Direct, Unicable or DiSEqC
switch by using " " or " " buttons.
English - 65 -
24.10.2011 12:57:59 24.10.2011 12:57:59