Using Dlna Network Service; Information; Step 1: Nero Media Home Installation; Step 2: Connecting To A Wired Or Wireless Network - Finlux 40FLHD971 Bedienungsanleitung

Using DLNA Network Service

Information

DLNA (Digital Living Network Alliance) is a standard
that eases viewing process of digital electronics and
makes them more convenient to use on a home
network. For further information, visit www.dlna.org.
DLNA standard allows you to view and play photos,
music and videos stored in the DLNA media server
connected to your home network.

Step 1: Nero Media Home Installation

DLNA function cannot be used if the server program
is not install to your PC. Please prepare your PC
with the provided Nero Media Home programme. For
more information about the installation, please refer
to appendix G.
Step 2: Connecting to a Wired or Wireless
Network

Wired Connection

• Connect your network's LAN cable to the
INPUT of your TV. Make sure that the preparation
of media server, connections and network settings
are completed properly (See the chapter, Network
Settings for more information).

Wireless Connection

IMPORTANT: "Veezy 100" USB dongle is required to
use wireless network feature. To use your TV with your
wireless network, you need a "Veezy 100" Wireless
USB dongle.
• Please plug in the Wi-Fi dongle to one of the USB
ports of the TV.
• Select Network Settings from the Settings
menu.
• Press YELLOW button to start searching for
available wireless networks. If any active wireless
networks are found, a list will be displayed.
• Please select your desired network from the list. If
the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via navigation
buttons (Left/Right/Up/Down) and OK button on the
remote control.
A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 73 A03_[GB]_MB70_5112UK_DVBT_C_S2_DLNA_MMH_40971LED_GOLD11_10075635_50200525.indd 73
• Wait until the IP address is shown on the screen. This
means that the connection is now established.
See the chapter Network Settings for detailed
confi guration information. You can press BLUE button
to test internet speed.
Step 3: Playing Shared Files via Media
Browser
• Select Media Browser by using Left or Right button
from the main menu and press OK button. Media
browser will be then displayed.
• DLNA support is available only with Media Browser
folder mode. To enable folder mode, go to Settings
tab in the main media browser screen and press
OK. In the settings options, highlight View Style and
change to Folder using Left or Right button.
• Please select desired media type and press
ETHERNET
• If sharing configurations are set properly, the
following OSD message will be displayed after
selecting the desired media type. Select OK to
display selected network or USB memory content.
If you want to refresh the device list, press GREEN
button. You can press MENU to exit.
• If available networks are found, they will be listed
on this screen.
• Select media server or network that you want to
connect by using " " or " " buttons and press
OK button.
English - 73 -
OK
24.10.2011 12:58:08 24.10.2011 12:58:08