For Your Safety - Tecsis P3230 Betriebsanleitung

5. For your safety

!
5. For your safety
„
Select the appropriate pressure transducer with regard to scale range,
performance and speciic measurement conditions prior to installing and
starting the instrument.
„
Warning
Observe the relevant national regulations (e.g.: EN 50178) and observe the
applicable standards and directives for special applications (e.g. with
toxic gases or liquids and with refrigeration plants or compressors). If you do
not observe the appropriate regulations, serious injuries and/or damage can
occur!
„
Open pressure connections only after the system is without pressure!
„
Please make sure that the pressure transducer is only used within the overload threshold
limit all the time!
„
Observe the ambient and working conditions outlined in section 7 „Technical data".
„
Ensure that the pressure transducer is only operated in accordance with the provisions i.e.
as described in the following instructions.
„
Do not interfere with or change the pressure transducer in any other way than described in
these operating instructions.
„
Remove the pressure transducer from service and mark it to prevent it from being used
again accidentally, if it becomes damaged or unsafe for operation
„
Take precautions with regard to remaining media in removed pressure transducer.
Remaining media in the pressure port may be hazardous or toxic!
„
Have repairs performed by the manufacturer only.
„
Open circuit before removing connector / cover.
Betriebsanleitung/Operating instructions
dangerous media such as acetylene, lammable gases or liquids and
GB
17