Maintenance, Accessories - Tecsis P3230 Betriebsanleitung

7. Starting, operation / 8. Maintenance, accessories
Speciications
CE- conformitiy
„
EMC directive
Wiring protection
„
Short-circuit proofness
„
Reverse polarity protection
Weight
„
Level probe
„
Cable
„
Additional weight
{ } Items in curved brackets are optional extras for additional price.
Functional test
The output signal must be proportional to the pressure. If not, this might point to a
!
damage of the diaphragm. In that case refer to chapter 10 „Troubleshooting".
„
Observe the ambient and working conditions outlined in section 7 „Technical
data".
„
Please make sure that the pressure transducer is only used within the over-
Warning
load threshold limit at all times!

8. Maintenance, accessories

„
tecsis pressure transducers require no maintenance.
„
Have repairs performed by the manufacturer only.
Betriebsanleitung/Operating instructions
Model P3230 / P3233
2004/108/EEC, EN 61 326 Emission (Group 1, Class B) and Immunity
(industrial locations)
Sig+ towards UB-
UB+ towards UB-
kg
Approx. 0.18
Approx. 0.08
Approx. 0.50
{Lightning protection
EN 61000-4-5; 1,5J}
Approx. 0.20
Approx. 0.08
Approx. 0.50
GB
23