Important Details For Your Information; A Quick Overview For You - Tecsis P3230 Betriebsanleitung

1. Important details for your information / 2. A quick overview for you

1. Important details for your information

Read these operating instructions before installing and starting the pressure transducer. Keep
the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications. If
questions remain regarding a speciic application, you can obtain further information:
„
Via our Internet address www.tecsis.de
„
The product data sheet is designated as DE725
„
Contact tecsis for additional technical support (+49) 69 / 5806-2357
If the serial number on the product label gets illegible (e.g. by mechanical damage or
repainting), the retraceability of the instrument is not possible any more.
tecsis pressure transducers are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
assembly and each instrument is fully tested prior to shipment.
Use of the product in accordance with the intended use P3230, P3233:
Use the pressure transducer to transform the pressure into an electrical signal.
Knowledge required: Install and start the pressure transducer only if you are familiar with the
relevant regulations and directives of your country and if you have the qualiication required.
You have to be acquainted with the rules and regulations on measurement and control techno-
logy and electric circuits, since this pressure transducer is „electrical equipment" as deined
by EN 50178. Depending on the operating conditions of your application you have to have the
corresponding knowledge, e.g. of aggressive media.

2. A quick overview for you

If you want to get a quick overview, read Chapters 3, 5, 7 and 10. There you will get some short
safety instructions and important information on your product and its starting. Read these
chapters in any case.
Betriebsanleitung/Operating instructions
GB
15