Safety Note; Use For Intended Purpose - Tecsis F3301 Originalbetriebsanleitung

Betriebsanleitung/Operating manual
F3301/F33C1/F33S1
1

Safety note

GB
1.1

Use for intended purpose

The load cells in model series F3301/F33C1/F33S1 are intended for
the measurement of static and dynamic tension or compression force.
List of series:
F3301: Standard version
F33C1: option 1: ATEX version acc. EN 60079-0:2012 and
F33S1: version acc. the requirements for functional safety acc. Maschi-
nes Directive 2006/42/EG, applies only in combination with a safe con-
trol, for example ELMS1 overload protection.
These devices have been constructed and tested in accordance with
the safety regulations for electronic measuring equipment. Any other
usage is deemed to be incorrect. The load cells can only be guaran-
teed to operate correctly and safely if the information in the operating
instructions is complied with. The legal and safety regulations that apply
to the respective application must also be observed during use (e.g.
VDE 0100). This also applies to the use of accessories. Tecsis load
cells are RoHS compliant acc. directive 2011/65 / EU article 2 para-
graph (2) and paragraph (4) (d), (e) and (g). The load cell is not intended
to be used a safety element. The correct and safe operation of this load
cell depends on correct transportation and proper storage, installation
and assembly and careful operation and maintenance.
www.tecsis.de
EN 60079-11:2012 (Ex ib).
IECEx version acc. IEC 60079-0:2011 (Ed. 6) and
IEC 60079-11:2011 (Ed. 6) (Ex ib).
The content of the ATEX/IECEx-operating instruc-
tion BD914_d is completely included in this operat-
ing instruction.
option 2: SIL version acc. to EN 62061:2005
option 3: UL version acc. to UL 61010-1 and CSA C22.2
NO. 61010-1.
BD_BE_973 b 23