Storage, Disposal - Tecsis P3230 Betriebsanleitung

9. Trouble shooting / 10. Storage, disposal
If the problem persists, contact our sales department.
USA, Canada: If the problem continues, contact tecsis or an authorized agent for assistance.
If the pressure transducer must be returned obtain an RMA (return material authorization)
number and shipping instructions from the place of purchase. Be sure to include detailed
information about the problem. Pressure transducers received by tecsis without a valid RMA
number will not be accepted.
Process material certiicate (Contamination declaration for returned goods)
Purge / clean dismounted instruments before returning them in order to protect our employees
and the environment from any hazard caused by adherent remaining media.
Service of instruments can only take place safely when a Product Return Form has been
submitted and fully illed-in. This Return Form contains information on all materials with which
the instrument has come into contact, either through installation, test purposes, or cleaning.
You can ind the Product Return Form on our internet site (www.tecsis.de).
!

10. Storage, disposal

When storing or disposing of the pressure transducer, take precautions with
regard to remaining media in removed pressure transducers. We recom-
mend cleaning the transducer properly and carefully. Remaining media in
Warning
the pressure port may be hazardous or toxic!
Storage: Mount the protection cap when storing the pressure transducer in order to
prevent any damage to the diaphragm.
Disposal: Dispose of instrument components and packaging materials in accordance
with the respective waste treatment and disposal regulations of the region or country to
which the instrument is supplied.
tecsis reserves the right to alter these technical speciications.
26 Betriebsanleitung/Operating instructions
GB