9. Trouble shooting
!
9. Trouble shooting
Take precautions with regard to remaining media in removed pressure trans-
ducers. Remaining media in the pressure port may be hazardous or toxic!
Remove the pressure transducer from service and mark it to prevent it from
Warning
being used again accidentally, if it becomes damaged or unsafe for operation.
Have repairs performed by the manufacturer only.
Do not insert any pointed or hard objects into the pressure port for cleaning to prevent
damage to the diaphragm.
Please verify in advance if pressure is being applied (valves/ ball valve etc. open) and if the right
voltage supply and the right type of wiring (2-wire/ 3-wire/4-wire) has been chosen?
24 Betriebsanleitung/Operating instructions
GB