Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Overload warning:
If the weight [C] exceeds the maximum capacity <Err> appears on the display.
Immediately remove the weight to avoid damaging the product.
Tare function:
Description of tare function:
Use the tare function to sequentially add and weigh quantities.
Let the individual weights be: C
, C
1
2
After you put a weight C on the product, you zero the display and add the next weight.
The total weight C
is given by: C
= C
T
T
Use the tare function as follows:
1. Turn the product on.
2. Press the ON/T key to zero the display.
- If you use a tray/container that weighs more than 100 g, the display shows <TARE>.
3. Add the first weight. Press the ON/T key to zero the display. The display shows <TARE>.
4. Add more weights. For each weight you add, zero the display before you add it.
c) Setting the time
Two time display formats are available: 24h and AM/PM
Use the
and
keys to adjust digits. Hold them down to fast-forward/reverse.
Set the time as follows:
1. Press the T-SET key until the time is displayed.
2. Press and hold the T-SET key until the minutes flash.
3. Adjust the minutes.
4. Press the T-SET key to confirm and advance to the hour settings.
5. Set the time display format and hours as follows:
- Study the below diagram to understand how the time formats switch.
- Press the
key until < 23:xx > is displayed.
- Continue pressing the
key to switch to the desired time format.
- Set the hours.
0:00h
12:00h
AM
PM
Begin AM/PM format
6. Press the T-SET key to confirm and exit.
d) Timer
You can use the timer and weigh at the same time.
Use the
and
keys to adjust digits. Hold them down to fast-forward/reverse.
Set the timer (0 – 99m59s) as follows:
1. Press the T-SET key until the timer time and
2. Press and hold the T-SET key until the seconds flash. Adjust the seconds.
3. Press the T-SET key to confirm and advance to the minute settings. Set the minutes.
4. Press the T-SET key to confirm and exit.
5. To start the timer, press and hold the UNIT key until the countdown starts.
- Press and hold the UNIT key repeatedly to interrupt/restart the countdown.
6. When the timer expires the alarm sounds and
7. Press any button to stop the alarm.
Storing
• Store the product preferably in the original packaging and in a cool and dry environment.
• For vertical storage, use the hanging hole, if necessary.
Care and cleaning
• If the plastic part of the product is stained with oil, spicy ingredients, vinegar or other stimu-
lating substances, clean it immediately.
• Clean the product with a dry or damp and fibre-free cloth.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Do do wash, submerge in water, or rinse under running water.
, C
, ..., C
3
n
+ C
+ C
+ ... + C
1
2
3
n
0:00h
12:00h
24 h
Switch to and begin 24h format
display.
flashes.
disappears.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used (re-
chargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Batteries ....................................... 2x 1.5 V, AAA size
Battery life ..................................... approx. 4 months (normal use)
Current consumption .................... max. 10 mA
Measuring capacity (C) range ...... 5 ≤ C ≤ 5000 g
Units ............................................. g/ml/fl.oz/lb:oz
Graduation .................................... d = 1 g
Timer ............................................ 0 – 99m59s
Operating/Storage conditions ....... 0 to +40 ºC, 20 – 80 % RH (non-condensing)
Dimensions (W x H x D) ............... 155 x 16 x 215
Weight .......................................... approx. 286 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2180166_v2_0220_02_jh_m_en_(1)
Werbung
Inhaltsverzeichnis
