Filling And Emptying The Well - Angelo Po 0G1CP1G Bedien- Und Installationshandbuch

FILLING AND EMPTYING THE WELL

Filling
The well can be filled in a number of different ways.
Quick no-limits filling.
– Press and turn the knob (C) to 1 to fill the well to
the level required. When the water reaches the
maximum level, the burner can be lit and the dif-
ferent top-up modes can be enabled.
Important
After filling, the knob (C) must be turned to
another position as otherwise water may
overflow from the well.
Quick automatic top-up.
– Turn the knob (C) to 2 to fill the well to the maxi-
mum level automatically when the water level
drops below the minimum threshold.
Slow automatic top-up.
– Turn the knob (C) to 3 for a slow, continuous flow
of water that keeps the water level inside the well
constant.
Important
If the water drops below the minimum level,
the "quick automatic top-up" mode is auto-
matically triggered.
Emptying
1 - Turn the knob (C) to 4 to shut off the water sup-
ply.
2 - Turn on the tap (D) to empty the well.
Important
The water drained from the appliance must
pass through a suitable drain line, resistant
to a temperature of at least 100° C.
The steam produced when the well is
drained must not come into contact with
the appliance (see also connection diagram
at back of manual).
C
4
D
- 9 -
1
2
3
IDM-39614900900.tif
IDM-39614901000.tif
C
IT
GB
DE
FR
ES
English