Prior To First Use - Redmond RMC-PM381E Benutzerhandbuch

Device Assembly ( , p. 3)
A1
1. The lid
2. Lid handle
3. Carrying handle
4. Removable steam valve
5. Shutoff valve
6. Steam valve safety cap
7. Shutoff valve rubber
8. O-ring
9. Bowl with non-stick coating
10. Control panel with display
Control panel ( , p. 4)
A2
1. Display
2. Automatic cooking programmes buttons
3. button — to decrease the value, reverse switching between cooking programmes
4. button — to increase the value, direct switching between cooking programmes
5. button — to adjust the operating pressure in pressure cooker programmes
6. button — to switch to temperature adjustment mode
7. button — to enable/disable Reheat function; to interrupt the cooking programme operation, to clear the previous settings
8. button — to switch to the cooking time adjustment mode
9. button — to switch to Time Delay adjustment mode
10. button — to enable the adjusted cooking mode, to enable/disable Keep Warm function
Display ( , p. 5)
A3
1. Keep Warm/Reheat mode indicator
2. Cooking mode/cooking time adjustment mode indicator
3. Time Delay mode indicator
4. Main lid locked indicator
5. Disabled audible signals indicator
6. Time/temperature value indicator
7. Pressure indicator
8. Waiting to access operating parameters indicator / pressure level indicator
I. PRIOR TO FIRST USE
Carefully remove the multicooker and its accessories from the packaging. Dispose of all packaging materials.
Keep all warning labels, including the serial number identification label located on the housing. The absence of the serial
number will deprive you of your warranty benefits!
After transportation or storage at low temperatures allow the appliance to stay at room temperature for at least 2 hours before using.
Wipe the housing of the appliance with a soft, damp cloth. Rinse the inner bowl with warm soapy water and dry thoroughly.
An odour on first use of the appliance is normal and does not indicate a malfunction. In such case, clean the appliance, fol-
lowing "Cleaning and Maintenance").
Place the appliance on a hard, even, horizontal surface so that the steam from the valve will not come into contact with wallpa-
per, decorative coverings, electronic devices or other items or materials which could be damaged by high humidity or temperatures.
Before use, make sure there are no chips or other defects on the outside or visible inside parts of the multicooker. There
should be nothing caught between the bowl and the heating element.
ATTENTION! Do not lift the appliance by the handle to open the lid.
Do not switch on the device without the bowl installed or with empty bowl inside. In case of accidental start of a cooking program,
it may result in critical overheating or damage of the anti-stick coating. Before frying, pour inside a little vegetable or sunflower oil.
8
11. Housing
12. Condensation collector
13. Stirring paddle
14. Serving spoon
15. Measuring cup
16. Steaming container
17. Power cord
18. Trivet
19. Removable inner lid
II. OPERATION
Lid Locking
When locking, the device lid is tightly closed and sealed with the frame that enables develop high pressure inside the work-
ing chamber.
When the pressure inside the chamber is above atmospheric pressure, the lid is locked automatically. If the lid does not open
freely upon completion of cooking, the pressure inside the working chamber is still too high. Let the device cool for several
minutes, then set the steam release valve into the Open position to normalize the pressure in the bowl.
ATTENTION! The device heats up during operation! Do not touch the metal parts during and after the cooking process.
Before moving the device, ensure that it is cooled down completely. Move the device holding it by the frame.
Safety System
REDMOND RMC-РМ381E Electric Pressure Cooker is equipped with the multi-level safety system. If temperature and/or
pressure in chamber exceed the permissible limits, the system normalizes these characteristics automatically without inter-
ruption of cooking process. If this fails to happen for a certain period of time, the operation of Electric Pressure Cooker is
stopped, and the device gives 6 short audible signals.
In case of interruption of the cooking process in the pressure cooker mode by pressing the
device while running a program), let the device cool for several minutes, then set the steam release valve into the Open
position to normalize the pressure in the bowl. Once the pressure in the working chamber is normalized, open the device lid.
Disabling Audible Signals
It is possible to enable/disable the audible signals in any operation mode of the device (except for setting the program
before start). For this purpose, press and hold the button for several seconds. If the audible signals are disabled, the
indicator lights up on the display.
Control panel lock
In order to ensure additional safety, the device control panel is provided with lock function that prevents accidental pressing
of the buttons.
To enable/disable the control panel lock in any operation mode (except for setting a program before start), press the
button and hold it while pressing the button, keep holding both buttons for several seconds. The device gives long au-
dible signal. Once the panel is locked, the indicator lights up on the display.
Setting Cooking Time
REDMOND RMC-РМ381E Electric Pressure Cooker is provided with an option to set cooking time for each program manu-
ally, except for EXPRESS program. The change increments and the possible range of the set time depend on the cooking
program selected.
After selecting an automatic program, press the button to set the cooking time. The hour value on the display starts to
blink. Press the and buttons to set the desired hour value. Press the
to the minute value setting. Set the minute value in the same manner.
Do not press any button on the panel for several seconds. The changes are saved automatically. To return to the hour value
setting before autosave, press the button again.
The hour and minute values are changed independently of each other. To quickly change a value, press and hold the desired
button.
Setting Cooking Temperature
When using the multicooker mode programs (except for the EXPRESS program), it is possible to change the cooking tem-
perature manually in the range of 35 to 180°С with an increment of 1°С.
After selecting an automatic program, press the button to set the cooking temperature. The default temperature value on
the display starts to blink.
Press the and buttons to set the desired value. Once the maximum/minimum value is achieved, the setting starts from
the beginning/end of the range. For rapid change of a value, press and hold the appropriate button.
Do not press any button on the panel for several seconds. The changes are saved automatically. The display returns to indi-
cation of the cooking time.
button (or de-energizing the
button to save the entered changes and to go