Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safeguards - Redmond RMC-PM381E Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
Carefully read all instructions before operating and save them for future reference. By carefully following these instructions
you can considerably prolong the service life of your appliance.
The safety measures and instructions contained in this manual do not cover all possible situations that may arise during
the operation of the appliance. When operating the device the user should be guided by common sense, be cautious and
attentive.

IMPORTANT SAFEGUARDS

• The manufacturer shall not be responsible for any failures arising from
the use of this product in a manner inconsistent with the technical or
safety standards.
• This appliance is intended to be used for nonindustrial use in house hold
and similar spheres of application. Industrial application or any other
misuse will be regarded as violation of proper service conditions. Should
this happen, manufacturer is not responsible for possible consequences.
• Before plugging in the appliance ensure that the circuit voltage matches
operating voltage of the appliance (see technical specifications or manu-
facturer' s plate on the appliance).
• Use an extension cord designed for power consumption of the appli-
ance as the parameter mismatch may result in a short circuit or fire
outbreak.
• The appliance must be grounded. Connect the appliance only to a prop-
erly installed power point. Failure to do so may result in the risk of electri-
cal shock. Use only grounded extension cords.
CAUTION! While in use the appliance heats up! Care should be
taken to avoid touching the housing, bowl, or any other metal parts
while operating. Make sure your hands are protected before han-
dling the device. To avoid burns, do not lean over the appliance
while opening the lid.
• Unplug the appliance after use, before cleaning or moving. Remove the
power cord with dry hands holding it by the plug, not cord.
6
• Do not place the cord in doorframes or by heat sources. Do not twist or
bend the power cord, ensure it is not in contact with sharp objects, corners
and edges of furniture.
PLEASE, NOTE: damaging the cord may lead to a failure that will not
be covered by the warranty. If the cable is damaged or requires replac-
ing, contact an authorized service center to have the cord replaced.
• Never place the device on soft surfaces or cover it to keep ventilation slots
clear of any obstruction.
• Do not operate the appliance outdoors to prevent water or any foreign
object or insect from getting into the device. Doing so may result in seri-
ous damage of the appliance.
• Always unplug the device and let it cool down before cleaning. Follow
cleaning and general maintenance guidelines when cleaning the unit.
• Always keep the steam release valve, pressure control valve, O-ring inside
of lid, condensate collection container in clean and serviceable conditions.
Do not plug in the device, if there are damages, blocks, deformations of
valves, inner lid and O-ring or if the condensate collection container is
full. When replacing O-ring by yourself, use only spare O-ring included
into the delivery set of the device.
• When cooking food under pressure, ensure that the bowl is filled with
water or other liquid of not less than 1/5 of bowl volume.
DO NOT fry and bake under high pressure!
• To avoid blockage of the steam release valve, fill the bowl with products
and water of not more than 4/5 of the bowl volume. When boiling the
products capable to swell up in hot water or produce the foam – not more
than 3/5 of the bowl volume.
DO NOT start the cooking program under high pressure if the device
lid is not completely locked!

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis