Concept ZN 8017 Bedienungsanleitung Seite 26

Note:
The
Tag with ironing info
5. Wait until the heating indicator stops shining. Only then has the ironing surface reached the right temperature. The
6. After use, set the temperature controller to the minimum, unplug the unit from the power source, and let it cool
down. Then pour the remaining water out of the tank.
Limescale sedimentation preventive function (ANTI-CALC)
This function is based on the filtration of materials from the water used. It softens the used water, which reduces the
sedimentation of limescale in the steam chamber.
Self-clean function
This function allows cleaning small sediments from the steam chamber. Use it once very two weeks.
2. Insert the plug into the mains outlet.
4. Wait until the heating indicator light stops shining.
5. Hold the unit horizontally over a sink or wide water vessel.
6. Push and hold the Self-clean button. Water will pour from the steam holes in the ironing surface, which will rinse
out small sediments from the steam chamber.
24
symbol on the tag means: "This fabric must not be ironed!"
Fabric type Temperature setting
Synthetic
MIN.
Polypropylene
Polyurethane
Polyamide
Polyester
Viscose
Silk
Wool
Cotton
MAX.
Linen
Steam setting
DRY
(MAX steam)
EN
EN
ZN8017