Supervisor - Carel pRack pR300 Bedienungsanleitung

ENG
Screen Cag16 is used to enter the coeffi cients for DEW point conversion:
Screen Cag17 is used to enter the coeffi cients for BUBBLE point conversion:
Screen Cag18 contains the parameters corresponding to the ID and CRCs:
After completing the confi guration, the alarm bell should stop fl ashing.

1.3 Supervisor

The parameters can also be confi gured using PVPRO.
A new parameter category has been created, called "Custom Refrigerant".
Fig. 1.a
In this category, all the parameters can be entered on one single screen.
6
"Gas custom management " +040010030 - 1.0 - 02.12.2015