Introduction; Proper Use; Features And Equipment; Included Items - Parkside PDS 290 A1 Montage-, Bedienungs- Und Sicherheitshinweise, Originalbetriebsanleitung, Originalbetriebsanleitung

Introduction

The following pictograms are used in these operating instructions / on the device:
V ~
W
Delta sander PDS 290 A1
©
Introduction
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the accom-
panying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.
©

Proper use

The device is intended for dry sanding and polishing
of wood, plastic, metal, filler and painted surfaces.
The device is particularly suitable for corners, pro-
files or difficult to access places. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
dangers. We will not accept liability for loss or
damage arising from improper use.
Not suitable for commercial use.
6 GB/IE
Downloaded from www.Manualslib.com
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
Volt (AC)
Watts (Effective power)
manuals search engine
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
For indoor use only!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Dispose packaging and appliance in
an environmentally-friendly way!
©

Features and equipment

1 ON / OFF switch
Oscillation speed setting wheel
2
Mains lead
3
Dust extraction spout
4
5 Ventilation openings
Backing plate (360° rotatable)
6
Adapter for external vacuum extraction
7
8 Reducer piece
©

Included items

1 Delta sander PDS 290 A1
1 Sanding sheet
1 Adapter for external vacuum extraction
1 Reducer piece
1 Operating instructions
©

Technical information

Nom. power input: 290 W
Rated voltage: 230V ~ 50 Hz
Nominal speed: n
Nom. oscillation speed: n
Backing plate: 360° rotatable
Protection class: II /
6,000 - 11,000 min -1
0
-1
12,000 - 22,000 min
0