Safety
continued
The equipment must only be used with fluids that are not aggressive in contact with the materials
■
and seals of the equipment. Otherwise, leaks may occur and hot or toxic fluid may escape.
The equipment and its components may only be installed and removed by specialist personnel.
■
Specialist personnel must have knowledge and experience of the following areas:
Producing pipe connections.
■
Selecting suitable lifting gear for the product, and using it safely.
■
Working with hazardous (contaminated, hot or pressurised) fluids.
■
Risk of minor injury
There is a risk of cuts from sharp-edged internal parts of the equipment. Always wear protective
■
gloves when working on the equipment.
If the equipment is inadequately supported during installation, there is a risk of crushing if it falls. Use
■
the eyebolt to secure lifting gear, if available. Secure the equipment during installation so it cannot
fall. Wear sturdy safety boots.
EN