Before You Start; During Or After Operation - Carson CG-1 micro Betriebsanleitung

3. Before you start

GB
• Install the gyro CG-1 in your model so that oscillation,
vibrations and agitation can be ruled out as best possible.
• Check the function safety of your model and of the remote
control system. Pay attention to visible damages such as
broken plug-in connections or damaged cables.
• Before each operation, control the settings of the trim slider
at the transmitter for different steering directions and, if
necessary, set them.
• Always switch the transmitter on fi rst. Only then may the
receiver with connected gyro be launched. Otherwise there can
be unforeseeable reactions of the model or of the servo.
• Check the gyro CG-1 before every fl ight for correct function
and secure fi t in the model. A loose and disconnected gyro
makes the model uncontrollable.

4. During or after operation

• Do not take any risks! Your own safety and that of your envi-
ronment is solely down to you being responsible when dealing
with the model.
• Improper operation can cause serious damage to people and
property! Therefore, during operation, ensure a suffi cient safety
distance to persons, animals and objects.
8
CARSON Gyro 507027